亚洲久久综合爱久久

<tbody id="wcddm"></tbody>
  • <rp id="wcddm"><acronym id="wcddm"><input id="wcddm"></input></acronym></rp>
      <em id="wcddm"></em>
      <tbody id="wcddm"></tbody>
      <em id="wcddm"></em>
      <rp id="wcddm"><object id="wcddm"><input id="wcddm"></input></object></rp>

      English

      021-5210 2968

      股票代碼:871141

      首頁
      關于我們
      產品中心
      新聞中心
      客服中心
      人才中心
      聯系我們

      訂單查詢

      產品中心
      當前所在位置:首頁>產品中心>檢測/測量>壓力檢測>
      • Vibro-Meter 振動傳感器 CE 680 M511

      Vibro-Meter 振動傳感器 CE 680 M511

      品 牌:VIBRO-METER

      產品型號:CE 680 M511
      產品簡介:

      Vibro-Meter 振動傳感器 CE 680 M511 專為惡劣工業環境中的機械設計 它采用工業標準的2線電壓傳輸技術,具有恒定電流。 輸出信號的靈敏度為100 mV / g。由于加速度計的隔離接地和內部屏蔽,沒有接地回路或框架電壓來干擾測量。CE 680 M511在高溫下具有極低的噪音水平和出色的偏置電壓穩定性。

      • 產品介紹
      • 詳細參數
      • 產品應用
      • 資料下載

      Vibro-Meter 振動傳感器 CE 680 M511

      來自Vibro-Meter®產品系列
      »專為中溫工業應用(-50至+ 120°C)而設計
      »頻率響應:1 Hz至9 kHz:±10%0.5 Hz至14 kHz:-3 dB
      »剪切模式操作,因此不會因熱瞬態而輸出
      »密封適用于惡劣環境
      »表殼絕緣,內部屏蔽
      »ESD保護


      From the Vibro-Meter ® product line
      » Designed for medium temperature industrial applications (−50 to +120 °C)
      » Frequency response: 1 Hz to 9 kHz: ±10 %  0.5 Hz to 14 kHz: −3 dB
      » Shear mode operation, therefore no output due to thermal transients
      » Hermetically sealed for harsh environments
      » Case insulated, internally shielded
      » ESD protection

      Vibro-Meter 振動傳感器 CE 680 M511

      Vibro-Meter 振動傳感器 CE 680 M511

      SPECIFICATIONS
      Note: Unless otherwise stated, all values listed are typical values, referenced at +23°C, 24 VDC supply, 6 mA constant current
      and 120 Hz.
      Operating
      Sensitivity (at +25°C) : 100 mV/g ±5%
      Dynamic range : 80 g
      Transverse sensitivity (maximum) : 5% of axial
      Linearity : 1% up to full scale
      Frequency response (nominal)
      • 3 Hz to 5 kHz : ±5%
      • 1 Hz to 9 kHz : ±10%
      • 0.5 Hz to 14.0 kHz : −3 dB
      Resonant frequency : 30 kHz
      Temperature response
      • Typical deviation
      −55 to +120°C : ±5%
      −55°C : −5%
      120°C : +3%
      Electrical
      Input supply current : 2 to 10 mA
      Supply voltage for current source : 18 to 30 VDC
      Bias output voltage : 12 VDC
      Electrical noise (equivalent g)
      • Broadband: 2.5 Hz to 25 kHz : 700 µg
      • Spectral: 10 Hz : 10 µg/√Hz
      100 Hz : 5 µg/√Hz
      1000 Hz : 5 µg/√Hz
      Output impedance (maximum) : 100 ?
      Grounding : Case isolated, internally shielded
      Reversed polarity : Protected
      Environmental
      Temperature range : −55 to +120°C
      Sealing : Hermetically sealed
      Vibration limit : 500 g (peak)
      Shock limit : 5000 g (peak)
      Base strain sensitivity (maximum) : 0.0002 g peak/µε
      ESD protection : Yes
      Electromagnetic sensitivity (equivalent) : 70 µg/gauss
      Physical
      Sensing element design : PZT ceramic / shear
      Weight (nominal) : 90 g
      Case material : 316L stainless steel
      Mounting : 1/4 - 28 UNF tapped hole
      Mounting torque : 2.7 N•m
      Output connector : 2 pin, MIL-C-5015 style
      Mating connector : MS3106F-10SL-4S or equivalent
      Calibration
      Dynamic calibration at factory. No subsequent calibration necessary.

       

      ORDERING INFORMATION
      To order please specify
      Type CE 680 M511
      Designation Piezoelectric accelerometer
      Ordering number 444-680-000-511

      ACCESSORIES
      Supplied
      Item Type
      • Adaptor studs 1/4 - 28 UNF 1/4 - 28 UNF to M8
      Optional
      Item Type Part number
      • Cable
      EC 318 922-318-000Dxxx
      EC 319 922-319-000Dxxx
      • Mounting adaptor MA 122_012 1/4 - 28 UNF to M6 (with conic base) 809-122-000-012
      • Insulating stud MA 122_021 1/4 - 28 UNF to M6 (with conic base)809-122-000-021

      Vibro-Meter 振動傳感器 CE 680 M511

      CE 680 M511是一款多用途振動傳感器,專為惡劣工業環境中的機械設計。 它采用工業標準的2線電壓傳輸技術,具有恒定電流。 輸出信號的靈敏度為100 mV / g。

      由于加速度計的隔離接地和內部屏蔽,沒有接地回路或框架電壓來干擾測量。
      CE 680 M511在高溫下具有極低的噪音水平和出色的偏置電壓穩定性。

      The CE 680 M511 is an all-purpose vibration sensor designed for use with machinery in harsh industrial environments. It uses the industry standard 2-wire voltage transmission technique with a constant current supply. The output signal has a sensitivity of 100 mV / g.

      Thanks to the accelerometer's isolated ground and internal shield, no ground loops or frame voltages are present to disturb the measurement.
      The CE 680 M511 shows extremely low noise levels and exceptional bias voltage stability at elevated temperatures.

      Vibro-Meter 振動傳感器 CE 680 M511

      亚洲久久综合爱久久
      <tbody id="wcddm"></tbody>
    1. <rp id="wcddm"><acronym id="wcddm"><input id="wcddm"></input></acronym></rp>
        <em id="wcddm"></em>
        <tbody id="wcddm"></tbody>
        <em id="wcddm"></em>
        <rp id="wcddm"><object id="wcddm"><input id="wcddm"></input></object></rp>